News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

tunnel ram inline progresive linkage questions

Started by hard-charger, May 02, 2006, 08:50:37 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

hard-charger

May 02, 2006, 08:50:37 PM
finally got my tunnel ram parts together.  got the linkage, its a progressive linkage, but have no idea how its gonna work with the throttle cable.  anyone know what i gotta do to get it hooked up? ???
if anyone has any pics of the throttle side of tunnel rams with progressive linkage then i could go from there.  thanks!

jg68

#1
May 03, 2006, 11:25:36 AM
Quote from: hard-charger on May 02, 2006, 08:50:37 PM
finally got my tunnel ram parts together.  got the linkage, its a progressive linkage, but have no idea how its gonna work with the throttle cable.  anyone know what i gotta do to get it hooked up? ???
if anyone has any pics of the throttle side of tunnel rams with progressive linkage then i could go from there.  thanks!

Didn't it come with instructions, or did you buy it used? I don't know if that linkage will work for a T/R, i've only seen them on low 2-4 set ups. i'll try & post this pic. this is what i did, it may not look pretty, but it works great & cost only 6.00 :icon_smile_big:

hard-charger

#2
May 03, 2006, 05:02:53 PM
the linkage i got is all there but i got it used, so no intructions.  im just confused on how the gas pedel's throttle cable and braket is gonna work with the linkage.
instead of having a rod going down the center between the carbs, it has a rod coming down off the back carb, down to the thottle braket area. and it looks like im gonna have to do some crazy bending on the thottle braket to get it to mabey work.  any suggestions?

jg68

#3
May 03, 2006, 06:43:18 PM
Quote from: hard-charger on May 03, 2006, 05:02:53 PM
the linkage i got is all there but i got it used, so no intructions.  im just confused on how the gas pedel's throttle cable and braket is gonna work with the linkage.
instead of having a rod going down the center between the carbs, it has a rod coming down off the back carb, down to the thottle braket area. and it looks like im gonna have to do some crazy bending on the thottle braket to get it to mabey work.  any suggestions?

You may have to make a bracket for it, or just bend up yours :icon_smile_big:, that is kinda odd having it in the back, but i guess thats so the progress linkage can work properly.
Print
Go Up Pages1
User actions