Oil pick up tube for a 402 oil pan

[Sixt8Chrgr]

Guys,

Can someone point me in the right direction to purchase an oil pick up tube for my 69 440 with the stock 402 pan?

Thanks

Lawrence

[bee1971]

Went through this last year with my 71 Bee 402 Oil Pan

And I still had to bend the new one , even with the windage tray and two gaskets it was slightly to long

I researched and researched and this number is the only one that I could find for the 402 Oil Pan

3/8" Pickup

https://www.summitracing.com/parts/dcc-4529564?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-mopar-performance&gclid=EAIaIQobChMI4eT_xZmj1QIVWCWBCh0yuwCJEAQYASABEgJRZ_D_BwE&ibanner=MobileSwitchNo


http://www.manciniracing.com/mop19ben.html

[cdr]

Went through this last year with my 71 Bee 402 Oil Pan

And I still had to bend the new one , even with the windage tray and two gaskets it was slightly to long

I researched and researched and this number is the only one that I could find for the 402 Oil Pan

3/8" Pickup

https://www.summitracing.com/parts/dcc-4529564?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-mopar-performance&gclid=EAIaIQobChMI4eT_xZmj1QIVWCWBCh0yuwCJEAQYASABEgJRZ_D_BwE&ibanner=MobileSwitchNo


http://www.manciniracing.com/mop19ben.html

I just did this last month,I cut 2 threads off & had to bend it a little.

[PRH]

My only comment about it being too long is..... In the MP catalog it's listed as fitting a 6qt system.

I always considered the 402 pan a 5qt system.

Wrong application?

Milodon sells a 4qt + filter pan(5-1/4" deep) that looks very similar to the 402 pan, and their p/u for that pan is a 18660.

I don't know if it would fit the 402 pan any better than the MP part or not.

EDIT: I just measured my 402 pan, and it's only 4-3/4" deep.

[Sixt8Chrgr]

I found this one from Mancini. Different pump than in your link?

Oil Pickup and Screen    MOPP4529565      1  30.95
Assemblies: Mopar
Performance Oil Pickup,
3/8" Pipe

The one I ordered is for the RB engine. I hope it fits.

http://www.manciniracing.com/196872rbengine.html

[PRH]

If it actually looks like the one in the pic of that link........it won't fit.

The 402 pan takes a pick-up with a dog leg in it......but it's not the same as the one that fits the 971 pan.
The straight tube hits the baffle.

The one that Melling sells(63-S2??)with the dog leg in it fits the 971 pan.......which will be slightly too long for the 402 pan.

[bee1971]

402 Oil Pan - Yes 5 quart with oil filter , so 4 quarts in pan in theory

402 Oil Pan used on 440 HP through 69 and 383 HP through 71


This pickup goes with this Oil Pan

971 Pan

https://www.summitracing.com/parts/dcc-5007807ab?ibanner=MobileSwitchNo

Pickup

http://www.manciniracing.com/mooilpiandsc.html

This pickup goes with this Oil Pan

402 Pan

http://www.manciniracing.com/mabigbloilpa.html

Pickup

http://www.manciniracing.com/mop19ben.html

[bee1971]

Complete Reproduction Package

402 Oil Pan

http://www.ebay.com/itm/66-71-Mopar-B-E-Body-Cuda-383-440-Big-Block-402-Oil-Pan-Pick-Up-Windage-Tray-/382164790747?hash=item58facbeddb:g:FcQAAOSwsB9V9eXN&vxp=mtr


Pickup

https://www.hooverautoparts.com/products/Engine/0986.php

I don't know if this pickup is the same reproduction as the Mancini one that I posted earlier that comes from Mopar Performance

[Sixt8Chrgr]

You guys were right. That Mancini tube did not work. My engine builder cut out 5/8" of an inch out of the tube spliced it together and all is good.