News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

another part available ? EDITED, POSTED WRONG PART NUMBER

Started by Nacho-RT74, April 08, 2006, 11:26:41 PM

Previous topic - Next topic

Nacho-RT74

I was checking about what else I'm needing from USA, since I'll get some stuff soon, thanks to RD...

I still have original rubber springs isolators on my car... They were some smashed since las owner added one leaf on original springs becsue the original from dealer were worn. I replaced springs about 6 years ago with new ones same as stock, made in here, with 5 leafs, but isolators didn't make pressure to keep in place the clamp/rear end so I cut a tire ang glued a piece on the upper isolator.

Now I would wish to get new isolators... are they available up there on regular mopar dealers ?

I have this part number on my 74 catalog. They appear just to C bodies ( weird  ??? :-\ ), but I think they are the same to any Mopar equipped with that:

3722764-5

I think one is the upper section and the other is the lower section.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Nacho-RT74

these isolators mounted on this clamp
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

RD

i will have to look for those... I am not sure who may make them.  anyone?
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

73rallye440magnum

I think I may have an extra set, but the are really crappy, as are the ones in my car. I just changed my leaf springs. Are they being reproduced?
WTB- 68 or 69 project

Past- '73 Rallye U code, '69 Coronet 500 vert, '68 Roadrunner clone, XP29H8, XP29G8, XH29G0

Nacho-RT74

As far I know Mopar had them because I think Cherokees use that stuff. Once I asked long time ago on a Mopar dealer down here and they were asked too much... I was out of job on those days... They show me how they are, even they are a little bit different because mine are some like Zig-zag shape on edges to fit tight on clamp and newers are completely straigt on edges they look like works.

Old chevies also use isolators, but they are very different size.

Ask if they fit before buy buddy, please.

I'll ask again down here on a Mopar dealer first to check for new part number and check if they really fit, and compare prices.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

doctorpimp

Nacho,
I don't know about the Mopar ones, but if you're not too worried about originality, you can get polyurethane replacements from Energy Suspension.  Less deflection etc ;)
http://www.energysuspension.com/pages/cry2.html -Performance Polyurethane Leaf Spring Pad Sets
'73 Coupe, 470, Keisler 5spd, 3.55 SG; Petty Blue; Hideaway Headlights.

www.cardomain.com/ride/2119216

Nacho-RT74

EDITED... it looks I crossed lines and look at wrong part number. The right one is:

3402379... all 4 isolators are the same.

Just went to a Mopar dealer and it looks they are not available not, even up there. It looks they are in contact with USA inventory by the net... just in case, if somebody could confirm it.

Thanks.

for aftermarket poliurethane ones I think I can find them down here, I preffer rubber ones by the moments ;)
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

beenaround


Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html