News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Dash cluster circuit board

Started by 69dc, April 12, 2016, 06:10:32 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

69dc

April 12, 2016, 06:10:32 AM
I purchased a new printed circuit board for the dash cluster on my 69 Charger from a seller on eBay. Looked identical until I got it installed and tried to plug in the 5 pin connector and found that the pins on the new board are smaller diameter than the old ones so the plug won't fit. I have contacted the seller but no response from him yet. Anyone run into this before?

69dc

#1
April 12, 2016, 06:58:15 PM
Anyone have a good five pin plug for sale? I'm going to try a factory plug on the five pins on the circuit board. My old one is as loose as the after-market plug that came with the new harness.
Print
Go Up Pages1
User actions