1966 Charger Qtr window roller question

[DantimosCharger]

I am working on restoring the Qtr window rollers and parts and have run a across this 3 wheel roller that I am curious about.

it is a 3 wheel roller with 2 inner wheels held in place by a wire and a big roller in the middle.

My question is this - the two small rollers are locked up most likely due to the oxidation of the metal surrounding it, I should be able to disassemble and clean it to make them work again but the large roller held in place by it's metal shaft looks impossible to remove without breaking the metal clip holding it in place and the roller seems to be locked to the shaft - is this roller supposed to turn on its shaft or is it locked? this would bean what ever turning motion is induced by cranking the window regulator assembly up and down would be held to the metal on metal shaft and clip?

[ODZKing]

Those were basically an assembly.  2520658 is part number.
They do sell kits
http://www.ebay.com/itm/66-70-Mopar-Dodge-Plymouth-B-body-QUARTER-WINDOW-ROLLER-KIT-Charger-GTX-Superbee-/161915538255?hash=item25b2eb0b4f:g:MrQAAOSwcOFWa3co&vxp=mtr
or search "Dodge Charger window roller" on google and a bunch come up. None of the 2520658 assembly though.
However Parts Voice says Brads has them NOS.
https://bradsnosparts.com/
Good luck

[DantimosCharger]

Thank you!
I will look into the NOS replacements at Brads.

Otherwise I may be taking them apart cleaning refinishing and putting them back together with a nice dose of White Lith grease..