Another disc to drum conversion question

[rnjump]

  On my '71 Charger I am using a '73 Charger as my donor. This is what the tech article from Moparts suggested. Now I notice the caliper is mounted rear of the spindle on the '73 where the '71 was mounted forward. Also I have since read the spindle is taller. Can I reverse the spindle (left to right)  to make it have a stock appearance? It seems to mount the same. Will the taller spindle make for problems?
          http://www.moparts.org/Tech/tech/pages/b-ebody.html

[Dino]

Yes you can swap sides, just make sure the caliper will clear the sway bar.  A taller spindle will change the camber but you can adjust that with the upper control arm camber bolts.  Just get an allignment done when you've made the swap.

[rnjump]

Thanks Dino, Appreciate that