News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

door ding repair

Started by tucknroll, July 19, 2015, 03:45:16 PM

Previous topic - Next topic

tucknroll

Hey guys, my boys have put a dime size ding on each  side of the charger. Any tricks to get them out? How about those glue pullers or those long tools to work them out.

Patronus

I would find a paint-less dent repair shop in your area. These guys are pros...(well some of them). It takes a lot of practice and a lot of homemade tools to do it right. If its not on a body line you should be ok.
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE

Lennard

Quote from: Patronus on July 19, 2015, 06:13:20 PM
I would find a paint-less dent repair shop in your area. These guys are pros...(well some of them). It takes a lot of practice and a lot of homemade tools to do it right. If its not on a body line you should be ok.
I agree, if you are going to try it yourself you are most likely going to crack the paint and make it worse.
Those experienced spot repair guys are magicians.

hemi-hampton

I agree with everybody else. LEON.

tucknroll


Mopar Nut

I just seen these tools in action on a show, looks easy on newer cars.

http://www.ultradenttools.com/
"Dear God, my prayer for 2024 is a fat bank account and a thin body. Please don't mix these up like you did the last ten years."

Dino

It's easy enough on a modern car but these old beasts with thick skin?   :scratchchin:

Well if anyone can do it, it'll be the paintless dent dudes.  They sure are magicians!
Extraordinary claims require extraordinary evidence.

tucknroll

I actually did pretty decent with a suction cup I found around the house!