Headers back exhaust system w/Gear Vendors

[hawkeye]

I am looking for a headers back exhaust system for a 2nd gen Charger with 727/ Gear Vendors.  Any suggestions?

[myk]

Does the Gear Vendors cause clearance issues? You could always just have a muffler shop 'fab something up...

[Dino]

The crossover may be in the way?   

Give TTI a call and see if they have a direct bolt on.

[Kern Dog]

I had a Gear Vendors in my car when I decided to add an X pipe center section.  I went with a MagnaFlow 3" mandrel bent kit and fabbed it up myself.

[hawkeye]

I bought an Accurate exhaust system to use but the crossover pipe hits right in the middle of the GV and the pipes are too close to the center line of the car.  Rather than modify it, I thought I would put it away for my next project.  I was hoping to buy something that I know would work rather than relying on some half ass muffler place.  It appears TTI sells just what I need.  Thanks guys.

[keepat]

Here is a picture of my silver 68 Charger with 3" TTI exhaust and H pipe with a GearVendor
Fit great!
Pat

[303 Mopar]

Here is a picture of my silver 68 Charger with 3" TTI exhaust and H pipe with a GearVendor
Fit great!
Pat

Is this the TTI exhaust?  I know they have one specific for GVOD.

[keepat]

Yes TTI 3" system! I welded on the stainless steel cutouts