Steering column bolts

[randy73]

Have a 73 and even though I bagged everything, I somehow lost the two short bolts that hold the column to the bracket under the dash. Anybody know the size or where to get replacements?

[2Luke2]

No idea, but a tap and die set should be able to get you at least the threads and you can go to your local hardware store to get a few different length bolts.

[ODZKing]

Which ones do you mean Randy?

[randy73]

the two that connect the bracket to the column and looks like you are missing one.

thanks for the pic.

[Mike DC]

 
I'm not sure what those bolts are, but I recall them being something pretty common on the car. 

[2Luke2]

The head of the bolt is 1/2" and the threads is 5/16 16NC it's about half an inch long.

[randy73]

thanks 2Luke2, that is what I needed know.

[randy73]

bought 4 - 5/16 x 3/4" with a 18 thread and they worked perfect.

[HeavyFuel]

Which ones do you mean Randy?

I hope this column pic was taken in the process of removal and repair, and not operational.

[ODZKing]

I hope this column pic was taken in the process of removal and repair, and not operational.

Dunno, found it on the internet.   

[HeavyFuel]

.

[ODZKing]

I think I was trying to find the name for those funny washers with the notches in them!   

[HeavyFuel]

I think I was trying to find the name for those funny washers with the notches in them!   

http://www.dodgecharger.com/forum/index.php/topic,99940.0.html

[ZEXTROT]

DOES ANYONE KNOW THE SPECS ON THE TWO BOLTS THAT GO THROUGH THE WHITE SQUARE PLASTIC WASHERS?

[ODZKing]

http://www.muellers.com/Crown-Lock-Washer,1945.html

http://www.megapartsusa.com/proddetail.asp?prod=132%2DSCS492

[ZEXTROT]

THOSE ARE THE WASHERS AND SPACERS, BUT I NEED THE BOLTS.

[BLK 68 R/T]

The bolts you are referring to are pressed into the dash frame support, you should have 2 non removable studs that stick down. Then you install the nuts and washers.

[Moparparts]

I have those correct original studs, bolts nuts and washers. PM or e-mail me