Trying to decide on subframe connectors

[tan top]

  I welded in   , 2 -1/2" x 2-1/2" box  & 1/8" thick from memory ,   chassis connectors , &  lower control arm strengthening plates ,  along with front & rear  ART torque boxes &  the hemi only rear shackle hanger reinforcement plates ., also every spot welded joint & seam , where the frame meets the floor  ,  I put a seam of mig weld , roughly 1-1/2  -2 inches long , every 2 inches apart or so . kind of over kill ,  to the motor combination I have in there now , although depends how your going to be using the car once finished !
         the original plan , for me  was to have a radical elephant motor  , & NOT use it  pottering around on a show field !,  as with every thing ,  life & lack of disposable dough , gets in the way   one day  or a procharger or both  

[bill440rt]

I went with the MP ones.
Definitely noticed a difference.