News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

´70 pinion angle

Started by Mikko, January 19, 2015, 06:00:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Mikko

January 19, 2015, 06:00:06 PM
Can anyone tell, what is pinion angle in Charger, assuming that car is in level measured from sills? 8 3/4 rear end, leafs springs.

My car is on 2 pillar lift, so measuring that is bit of pain.

I´m installing my engine&transmission at the moment  and i should decide what angle i´ll mount them. New hemi and T56 swap and making pretty much everything from a scratch.

John_Kunkel

#1
January 20, 2015, 03:01:26 PM

Don't know about the sill relation but the B-body pinion is 4 degrees up with the housing spring pad level.
Pardon me but my karma just ran over your dogma.
Print
Go Up Pages1
User actions