News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Bearing in steering column

Started by keith88, August 31, 2014, 11:26:41 AM

Previous topic - Next topic

tan top

 not been able to find a staple picture either  , but have altered a picture off the internet below !  staple is the grey line   :yesnod:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

keith88

Thanks for the illustration hard to believe that that stops it from spinning.  :shruggy:
1969 Charger  Orange /black top  (1989) 360 engine stock with added xtreme comp cam and a 4 bbl  , 904 trans/shift kit , 8-1/4 rear.. with general lee accents.

clemul

Staple is not to keep isolator from spinning. It is a ground for the horn and if you leave it out your horn will not work.

keith88

I don't have it and the horn works fine. And i cant see where it would stop it from spinning either there is no pressure on it to spin it spins on the bearing not on the outside insulator piece.
1969 Charger  Orange /black top  (1989) 360 engine stock with added xtreme comp cam and a 4 bbl  , 904 trans/shift kit , 8-1/4 rear.. with general lee accents.


keith88

OK proved your point ..but i still don't have it,matter of fact i don't even have the insulator in place i used a section of old flat phone cord to fill the gap and the horn works fine. :shruggy:
1969 Charger  Orange /black top  (1989) 360 engine stock with added xtreme comp cam and a 4 bbl  , 904 trans/shift kit , 8-1/4 rear.. with general lee accents.

Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

tan top

Quote from: Nacho-RT74 on September 28, 2014, 11:45:54 AM
Quote from: clemul on September 23, 2014, 10:23:07 AM
Staple is not to keep isolator from spinning. It is a ground for the horn and if you leave it out your horn will not work.

Quote from: clemul on September 23, 2014, 10:52:15 AM
http://www.hamtramck-historical.com/images/TSBs/1967/D67-19-4%20p1.jpg

http://www.hamtramck-historical.com/images/TSBs/1967/D67-19-4%20p2.jpg

Damn really interesting!!!

  :cheers:  
good find    :o interesting   :yesnod:   !  :scratchchin:

thinking now , where I read it about to stop the rubber insulator / bushing  spinning  :think:  
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html