Engle Cams Catalog Change

[chargercrazy]

I was thinking about replicating Mfr426's 440Source Stroker build, but the Engle K60H Cam is not in the new catalog listed on their website.  What would be the closest cam to the K60H in their new catalog?

I can't remember the K60H specs so I have nothing to compare to.

Or, would you recommend a different cam for a 440>512 Stroker build to get similar torque numbers as Mfr426's build?

[Rolling_Thunder]

K60 Lobe was as follows

Advertised Duration: 288*
Duration @ .050": 238*
Lift at Valve:  0.534"

[BudW]

It is not my intent of dig up an old post – but it appears to apply to me.

I went to Engle's web site and they have 2010 catalog to download.  At first I thought it was odd the catalog was 4 years old.

The K60H camshaft listed.  Going by the above mentioned camshaft specs (post above this one) and found nothing close, either.

A Google search fount this web site:  http://www.autoinsanity.com/misc/Englecams1.html
GRIND LIFT LIFT LIFT DURATION DURATION DURATION
K-60HYD .570" .534" .356" 285 238 152
It says this is a 2001 updated grind (and again – the numbers are not close).

Further research shows Engle Cams got bought out in 2009, so I wonder ...

Has anyone purchased a K60H camshaft, sense 2010?

One thing is I hadn't done is called them yet - but wanted to be informed about the facts before calling.

If the K60H is no longer available, what would be good second choice (see my engine post on http://www.dodgecharger.com/forum/index.php/topic,113492.0.html )

Thank you,
BudW

[metallicareload99]

I used their K-56 for several years till it went flat.  Last time I looked, it seemed like the old MoPar grinds were still in the catalog, but in the AMC section

[firefighter3931]

Engle was sold a few years ago and for some reason the old Chrysler cams were deletedd from their online catalog. Give them a call and ask. Pretty dure they still have those lobes available on a custom grind. 



Ron