News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Help with build sheet decoding 68 charger RT

Started by jrmummy440rt, March 21, 2014, 11:23:24 PM

Previous topic - Next topic

jrmummy440rt

build sheet decoding for 68 charger RTHello, I just recently got this 68 RT from another member and very happy to get this car!!!! I was wondering if anyone  can help decode the build/broadcast sheet for my new car I really want to restore her back to its original state as best as possible. Some of the harder to read numbers starting with the top line I'm looking to get the entire sheet decoded below is the hardest to read numbers. Thanks for all your help!!!!!!!!! I can also send the pic in an email if that makes it easier ro zoom in. My file is too large to upload and can't change the size on my tablet you can PM me so I can send a high res pic to your email thanks, Jon.
Row 1
"UDF" (after paint & style) B
Row 2
TRIM: C6X TIRES:44
ROW 3 covered by crayon mark under lights
ASH RECEIVER:5 TRUNK:6 TURN IND. FNDR/HOOD:7
Row 4 covered by crayon mark
UNDERCOAT & UNDERHOOD PAD: LOOKS LIKE A #9 OR POSSIBLY#5
Row 5 under SPL CODES
SOLD CAR:1
ROW 7 BUILD CODES
AXLE:244 although paper is rpped there there is enough of the top to read what looks like 244
PINION:32 WHEEL:300 as far as I can tell WHEEL COVERS:98 PROP. SHAFT:62
TORSION BAR LEFT:781 RIGHT:780 REAR SPRINGS LEFT: can only make out last two digits:94
SPRINGS RIGHT:964


6bblgt

"UDF" (after paint & style) B = Upper Door Frame Paint "BLACK"
TRIM: C6X = Charger vinyl buckets "BLACK"
TIRES:44 = F70-14 "red stripe" GOODYEAR SPEEDWAYs
ASH RECEIVER:5 = 515 ash tray light
TRUNK:6 = 516 trunk light
TURN IND. FNDR/HOOD:7 = 517 hood turn signal indicators
UNDERCOAT & UNDERHOOD PAD: LOOKS LIKE A #9 = 579 undercoating w/hood pad
SOLD CAR:1 = 691 "SOLD" car
AXLE:244 = 3.23:1 ratio 8-3/4" w/sure-grip & 11" brakes
PINION:32 = 2538932 "black" 32 tooth speed-o pinion
WHEEL:300 = 14x5.5" chrome "ROAD" wheels
WHEEL COVERS:98 = xxxxx98 "ROAD" wheel center cap
PROP. SHAFT:62 = 2852162 driveshaft 3.00x52.07" lg.
TORSION BAR LEFT:781 = 1857781 .92 dia.
RIGHT:780 = 1857780 .92 dia.
REAR SPRINGS LEFT: can only make out last two digits:794 = 2539794
SPRINGS RIGHT:964 = 2539964

I'd like to see the whole b'cast sheet - email a pic(s) to dhead68"AT"hotmail.com

jrmummy440rt