News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Removed my gauges

Started by Matthan, January 17, 2014, 05:56:01 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Matthan

January 17, 2014, 05:56:01 PM
I removed my gauge panel out of my 69 charger and now my charger will not start. Do I need the gauge panel into make a full circuit?

XH29N0G

#1
January 17, 2014, 06:02:49 PM
http://www.dodgecharger.com/forum/index.php/topic,41970.msg462495/topicseen.html#msg462495

I think you just connect the ammeter leads together.  Wait to see if someone warns against it.
Who in their right mind would say

"The science should not stand in the way of this."? 

Science is just observation and hypothesis.  Policy stands in the way.........

Or maybe it protects us. 

I suppose it depends on the specific case.....

Canadian1968

#2
January 17, 2014, 07:14:02 PM
Yes All your power runs threw the ammeter . You can simply connect the two ends with a nut and bolt . Make sure you insulate from everything else though

squeakfinder

#3
January 17, 2014, 07:53:03 PM
Yeah, what every buddy else said about the amp gauge. Just make sure the battery is disconnected before handling any of these things.
Still looking for 15x7 Appliance slotted mags.....

myk

#4
January 17, 2014, 08:03:34 PM
Do yourself a favor and keep that 'amp bypassed...

jaak

#5
January 17, 2014, 10:55:06 PM
Quote from: myk on January 17, 2014, 08:03:34 PM
Do yourself a favor and keep that 'amp bypassed...

:iagree:

1974dodgecharger

#6
January 18, 2014, 02:16:26 AM
Quote from: jaak on January 17, 2014, 10:55:06 PM
Quote from: myk on January 17, 2014, 08:03:34 PM
Do yourself a favor and keep that 'amp bypassed...

:iagree:

Bypass and just go up to a 10guage wire instead that 16 stuff...yuck.
Print
Go Up Pages1
User actions