Factory production line mistakes

[fy469rtse]

What errors have you found with your cars build,
Colour, accessories, missing bits, what have you found and thought nothing of it but it nags you to have an answer

[b5blue]

The roof to windshield frame is pinch welded. Along the top I found they must have worked from the center of the top over to the drivers side then up the side and around the corner. Where that operation met there was a bulge in the seam that should have been ground off. It was the cause of a leak in the windshield that plagued my car for 35 years! It was just enough to throw gasket and glass out of alignment.   

[fy469rtse]

Ok no one is going to post, my first car 68 RT after paint Rust work etc, when putting front screen clips were wrong , cowl panel original, or some one had done a damn fine job of replacing it, these were
the bottom ones, ended up using ones from a similar body year but Plymouth
The proper ones too short, it also had full tint windows but code on tag was for screen only, body had a few odd things not installed, like the factory rear muffler , mount that's welded on, ? Both were screwed on

[ODZKing]

My 67 has 1968 vent wing handles.  Late May build.
Not sure if that is a mistake or simply a change in the line.
Found that interesting though.

[Mike DC]

 
My friend bought a Mustang a few years go.  It came with a Ford engine in it for some reason.

[A383Wing]

I have the wrong color blue front side marker bezels on my 73 Pontiac....