Adjustable pinion snubber question??????

[74Charger]

I am having a adjustable pinion snubber fabricated using the original snubber base.  My question is..... What is the proper height you want you snubber at when adjusted for strip conditions?  Right up against the body? or 1/2" away from the body?  I have heard both.  Also when setup for street/cruise. What is a proper height?

[8WHEELER]

I can tell you on my car that sits 1 1/2in lower in the back, I made a 1in steel block on my original snubber.
Then tack welded the rubber portion to the top of that, It then was touching the bottom of the car for 20yrs
and raced it that way, and used it as my daily driver, never had one problem. But I know there should be about
a 1/2 space for street driving, but I never had any issues.

Dan

[74Charger]

Thanks for the info Dan!  I will put it right up against the body for strip setup.  And plan on another hole 1/2" from the body just in case I want to move it down for the street.