Sub-Frame connector - 72 Charger?

[72Charger-SE]

I am looking to purchase a pair of sub-frame connectors for my 72 SE in preparation for the mildly built '68 440.  This is a significant HP increase versus the factory 400.  What would you recommend?  Links would be appreciated. 

Thanks
Chad

[HPP]

Anything is an improvement over nothing, even bolt in units. But, things are best if you can at least weld in the ends. The contoured to the floor board sets like nice and appear OEM, but require lots of work to fit correctly and are not necessarily an improvement over a straight, welded connector.

[72Charger-SE]

Thank You...   I am guessing a 71 - 74 sub-frame connector will properly fit a 72, correct?

[moparguy01]

71-72 will. 73 and 74 are a different animal due to the isolated frame parts. It makes 73-74 a pain in the butt. but doable if your creative. i have them in my 74 but they are all custom

[ottawamerc]

Look at these, they are going into my 71 this winter

frame connectors
http://store.uscartool.com/71-72-b-body-frame-connector.html

Torque boxes

http://store.uscartool.com/b-body-torque-boxes.html


Scott

[72Charger-SE]

Great.. Thanks.   I was wondering if I need the weld on type or if I can just get one that is welded on the front and back?