looking for transmition bellhousing to motor bolts including starter bolts

[sgt72charger]

as stated any good place to source these bolts

440 motor
727 tci streetfighter transmition
need bolts

already checked machini, 440 source, ebay, jegs.....

[Cooter]

best bet would be new. Standard thead.
I think they are 3/8 NC bolts.
Starter should be same maybe shorter.

[ws23rt]

Are you looking for information such as bolt size, length, grade,etc?
Do you need factory correct looking bolts?
If you don't care about factory correct appearance I would make a shopping list and go to Ace Hardware and get a minimum of grade 5.
Grade 8 is a bit more money but not much.

[cudaken]

 Run something into the bolt holes and she how long you need. (hope they are out on the car) Buy as closes as you can get (I would go a tad longer than shorter) and buy a nut the same sizes.

Thread in the bolt and if it is to long, mark it and pull it out. Thread on the nut and grind the bolt down and take the nut off to clean up the threads.

Grade 5 will do just fine, but grade 8, well it is stronger so what the heck!

Cuda Ken  

[sgt72charger]

i guess im going to have to go to the local hardware store...
3/8 standard thread ?

[John_Kunkel]

The top four bolts are 3/8"-16 X 1 1/4" long.


The bottom two bolts are 7/16"-14, the starter side is 2" long and the opposite side is 1 3/4" long.


The starter stud goes on the bottom, it is 7/16" X 2". The top of the starter takes a 7/16"-14 X 1 1/2" bolt.

All of the original bolts are the captive washer type and the length measurement is taken from the thread side of the washer to the end of the threads. Grade 5 is sufficient.

[ACUDANUT]

What is a transmition ?

[sgt72charger]

transmission or transmition is where you mind you own f&*king business.  Thank you for the correction.

[sgt72charger]

thanks for the help John thats exactly what i was looking for...

[ACUDANUT]

If you can't take a kidding, than don't come here. 

[sgt72charger]

boohooo haha you dont like it either 

[jlatessa]

It's THEN don't come here!!


Joe.....hope you can take a kidding?

[ACUDANUT]

boohooo haha you dont like it either 

New Guy, don't come here and try to own the site. F/O

[sgt72charger]

boohooo haha you dont like it either

New Guy, don't come here and try to own the site. F/O

the only thing i own is your mom... just kidding... you old guys crack me up.
I am as you could tell not that smart and new to Mopars but you should be happy I wanted a new project car i could talk to other people about and have a some what mature conversation with considering the crowd i was around prior was to immature for me.... or maybe im just getting older.. any ways not getting butt hurt just messing you.