6 Pack rod torque specs

[69dodge383]

I have a 1972 440HP that I am putting in my 69 charger.  6 pack rods. Service manual says 45-50 ft lbs. I have seen online that heavy duty rods go to 55 ft lbs. (see link --> http://boxwrench.net/specs/bchrys_B.htm)

I have my rods at 45 Ibs now. With loctite on. I havent put the oil pan on so if I need to re-torque I can.

Motor specs:

440 + .030
Edelbrock performer RPM heads
Victor Jr single plane
850 demon
Hughes solid llifter cam -- 245 intake 250 exhaust 108 LSA - .560 intake lift .575 exhaust lift
Redline 6700 (per previous owner)

Motor with specs above was in 68 barracuda before I bought it. Did cylinder hone, new gaskets, new rings, new bearings. All parts top of line.

[John_Kunkel]

The heavy rod uses the exact same bolt/nut as the standard rod so the torque spec is the same.