What's this part ???

[RTSE440]

Hello all don't know if there is a section or a topic for this but when i purchased my car it came in boxes so yeah i didn't pull it apart so now I'm going through the pain staking task of working out what's what so far I've done quite well but some bits i have no idea what's what so i thought I'd start my own little thread what's this part so I'll be putting stuff up as i go on the same thread instead of starting a new topic every time so if your all don't mind can you check in from time to time to see if i need any help identifying bit's and pieces thanks guys any help will be appreciated  

[RTSE440]

what's this part

[70 sublime]

Hard to tell how big it is

Are your crank window stuff apart in the car ?  Looks like a stopper when the glass gets to the bottom

[RTSE440]

i was thinking the same thing window related  The cars got power windows & this piece stands around 5inches tall

[kent]

Hard to tell how big it is

Are your crank window stuff apart in the car ?  Looks like a stopper when the glass gets to the bottom

That's exactly what it is. Window bump stop.  It bolts to the inside of the door.

[69 OUR/TEA]

Yes,that's the bottom stop on power window cars , crank windows do not have this .

[RTSE440]

Thanks guys for the reply's much appreciated 1 down 3million to go stay tuned for some more of what's this part

[VegasCharger]

Yes,that's the bottom stop on power window cars , crank windows do not have this .

.
For the doors correct? And not the rear quarter glass? I have a 1968 with power windows. I've been into the rears to fix them and don't have this type of bottom stop. Haven't been into the doors yet.

[69 OUR/TEA]

Yes , only on the doors

[RTSE440]

Just wondering do any vendors make the replacement bump stop rubber by chance

[RTSE440]

what's this part guys it's chrome thank you

[RTSE440]

and another

[RTSE440]

last one for today thanks guys

[kent]

For the doors also. Going to find a picture for you. The little gold colored "J" clamps. Back in a bit once I find a pic.

[kent]

They go on the inside of the door to hold the inside door release rod. Here are a couple of pictures where it's mounted one on the outside for reference the other showing it actually attached. The star screw holds it to the door in that recessed area. Can you see how it goes?? That little nipple/ tit goes in that hold to keep the correct orientation. So really you can't put it on incorrectly. I say loosely. 
Sorry for the large pics. I'll try harder next time

[RTSE440]

Thanks Kent much appreciated  one down 2 to go

[Wingnut426]

Part in Reply#11 is a starter shield. WINGNUT

[kent]

Part in Reply#11 is a starter shield. WINGNUT

Why yes that is Wingnut. I should have seen that. Was not sure of the size. It's the only excuse I have. lol   Now If "I" could get a better look at that first one  and maybe something for size comparison. I tried zooming it in but gets distorted. Yes I'm getting old. That being said I still may not know.

[RTSE440]

Thanks guys 2 down one to go unfortunately i tried putting a bigger picture up but it won't load say's it's to large I'll try again. It's some type of finishing end cap as it's chrome plated  it's about an inch in size if that