News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Fuel Injector size

Started by Rolling_Thunder, February 10, 2006, 12:38:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Rolling_Thunder

February 10, 2006, 12:38:14 PM
Question....    I'm planning on making a MPFI system sooner or later - it will go one a big stroked 496...     I was thinking 38lb injectors...   does anyone know a better choice ?
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

Chryco Psycho

#1
February 14, 2006, 03:58:30 PM
sounds about right , could still be on the small side , I think 25 lb / hr is typical in a 40 CI cylinder & you are approx 50% larger than that at about 62 ci / cyinder & the injector is just over 50% larger as well
Print
Go Up Pages1
User actions