Any chance of a steering column bolt picture?

[440]

I must have overlooked taking pics of or documenting the two bolts that hold the steering column o-ring retainer to the floor plate. Same bolt thread that bolts the floor plate to the firewall, but I believe they are shorter with a smaller washer.

Anyone have any pictures of said bolts and or length, washer size and are these still available? Lastly, anyone know if the upper steering column mounting studs are being reproduced?

Thanks

[Charger-Bodie]

I don't have a p.ic of this right here, but you are right. 5/16 bolt about 3/4 long and about a 3/4 dia. Washer

[Lennard]

R/T specialties should have them.

[Charger-Bodie]

Lennard , Those are the ones that hold the plate to the firewall. The ones in question ( I think) are the ones that hold the o ring type retainer to the firewall plate.

[Lennard]

My bad, disregard my first reply.

[tan top]

 if no one comes up with a picture , before !!  , i'll take mine out & take a picture , tonight   or at the weekend  , going to run a new set of mechanical gauges , under dash  ,

[440]

Thanks Tan Top, that would be great. Yes, they are the bolts for the o-ring retainer thingy.

[tan top]

 

[440]

Perfect, thanks Tan Top  Much appreciated.

[tan top]

Perfect, thanks Tan Top  Much appreciated.