What headers

[SG1022]

I currently have hooker super comps on my '74 360 charger. It has magnum heads, and hooker headers are GARBAGE. They are a PITA to work with, and the driver side hangs down far too low.

Can anyone suggest some replacements? I am in the 200-400$ range, and am doing headwork so I figured I might as well do headers now also.

[404NOTFOUND]

I'm happy with the Magnaflow headers I have. They are thin but the flanges are thick. I only had to add one small dent to clear the drivers side torsion bar. Tons of room around the stock starter which was a nice surprise. Changing plugs on the Edelbrock angle plug heads is not easy but can be done. Good headers for the price I think.

[Dodgecharger74]

I am running TTI,s on my 360 magnum no grd clearence issues They do run right thru the area for a column shif linkage Had to refab their part to work.

[SG1022]

I am running TTI,s on my 360 magnum no grd clearence issues They do run right thru the area for a column shif linkage Had to refab their part to work.

I have a floorshift, but the TTIs are a bit out of my price range. Can anyone vouche for the fitment of hedmans, or flowtech?

[404NOTFOUND]

Like the Magnaflows, I have heard only good things about the Hedmans when it comes to fit. All I hear about the Hookers are that they are good headers but don't fit worth a damn.