Mopar intake

[mopar2]

Hi I was woundering if this is close to the Mopar Performance P5153525 -Dual Plane Intake Manifolds were the same as Edelbrock 7193 - Edelbrock Performer RPM Intake Manifolds or closer to stock. I like the mopar and Wedge wording on the mopar intake, if I got the Eddy RPM preformance from it. Thanks



http://www.summitracing.com/parts/DCC-5153525/?rtype=7

[mopar2]

One more thing Summit says it's for Idle-6,000
while http://www.mopartsracing.com/parts/bb.html shows it 2500 to 6500 rpm
Both part numbers the same P5153525

[femtnmax]

In the Moparts ad I think they mean increased airflow at higher rpm over the cast iron OEM manifolds.  The summit rpm range of idle to 6000 sounds correct.  The general shape looks very similar to Edy rpm intake which has rpm range similar to summits numbers.

[firefighter3931]

The manifold you linked to is identical to the Performer RPM. 

Edelbrock cast's that manifold for Mopar Performance. 




Ron

[mopar2]

Thank you both , I wanted the Edelbrock Performer RPM flow/proformance, with the mopar/wedge lettering but was afraid to get it not knowing. I knew once again this forum would know . Thanks again and now I'm going to go order the Mopar