1/4 glass belt moulding

[PasiR]

Anyone here with pictures how this moulding is attached to the body? I'm trying to assemble buddys car and he do not remember what kind of screws/clips was there.
I guess this moulding goes in first, then roof rail metal channel. Am I right??

[tan top]

what year ?

[PasiR]

Sorry guys, -70RT.

[gtx6970]

They have screws on the inside that are under the 1/4 glass window sweeps

[PasiR]

Bill, yep screws are not a problem, but those "J-clips" are missing. Actually I found two of them, guess I need to improvise the rest... 

[gtx6970]

J clips ? got a picture of one ?

I thought they screwed directly into the 1/4 panel lip that the window sweep clips into

[tan top]

it don't show  much of the clips ,

((but i took this picture of mine from inside the trunk !!   for another thread )))        

can just make out 3 of the Jclips                  

[PasiR]

Here is J-clip

[PasiR]

And round holes for clips on body.

[bill440rt]

The J-clips are very deep and hard to find. I came up dry at local auto supply stores & ended up using speed nuts behind them instead.

Bill, you got a source for these?? 

[gtx6970]

Bill, you got a source for these?? 

No, Can't say I've never seen them before ( at least close to pay attention to them anyway)

[PasiR]

I fabbed own clips yesterday evening and got mouldings installed today.

[twodko]

I get in contact with Tom at R/T Specialties, if anyone has them he does. The phone may ring several times but don't hang up, he will answer. Good luck.