News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

2nd gen - rocker moldings? repro available?

Started by marangen, January 17, 2006, 10:40:44 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

marangen

January 17, 2006, 10:40:44 AM

the trim that goes under the doors...

is that what they are called?

hard to find?

M

694spdRT

#1
January 17, 2006, 11:10:54 AM
Check out Chris's site. He has the reproduction mouldings on his R/T.

http://www.6t9charger.com/
1968 Charger 383 auto
1969 Charger R/T 440 4 speed
1970 Charger 500 440 auto
1972 Challenger 318
1976 W200 Club Cab 4x4 400 auto 
1978 Ramcharger 360 auto
2001 Durango SLT 4.7L (daily driver)
2005 Ram 2500 4x4 Big Horn Cummins Diesel 6 speed
2005 Jeep Grand Cherokee Limited 5.7 Hemi

Just 6T9 CHGR

#2
January 17, 2006, 11:37:27 AM
The M25 Wide Sill Moldings are available from Metro Parts.  They sell them sometimes on ebay as well.
While not 100% "correct" they are close enough for me.....
Chris' '69 Charger R/T

bill440rt

#3
January 17, 2006, 01:44:43 PM
One of the differences I've noticed is that the originals also had a sheet metal screw attaching them at the rear of the molding. The repros do not have this screw hole.
It shouldn't be that hard to (carefully!) drill & countersink a hole in the repro molding, if you really have to have one.
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

dd44068

#4
January 18, 2006, 01:24:30 PM
I picked up my moldings @ the paddock I believe that year one sells them to
Print
Go Up Pages1
User actions