Electronic Ignition Box Location with A/C firewall + conversion advice?

[Corellian Corvette]

Hey folks!

I'm preparing to finally deal with my ignition problems using an MSD distributor by installing an FBO Distributor and Box in my 68 Charger.

My car was a standard coil car and I just upgraded to an MSD Blaster 2 when I used the MSD distributor

Now I need to re-wire for an electronic ignition box 

So 2 major questions:

1. Any good wiring guides for swapping from the regular ignition to the electronic box?
2. Where the heck to I actually locate the ignition box? I have an A/C car and the firewall is pretty well taken over. Where are people putting the box?

Thanks!!

[471_Magnum]

The answer to your second question is below the washer fluid reservoir, or inside the glove box.

[WHITE AND RED 69]

I put mine under the washer bottle. ran the coil wires along the ac line, the distributer wires behind the alternator, and the power wires under the headlights.  

[nascarxx29]

looks good .Ive done under battery tray with alighment cover off to get it some air from underneath hood temperatures.And have put modules in the back underside of glove box

[471_Magnum]

Not much room under the battery tray with the vacuum canister there.

[Just 6T9 CHGR]

How about here.... 

[Roger 68 charger]

I put mine under the washer bottle. ran the coil wires along the ac line, the distributer wires behind the alternator, and the power wires under the headlights.  

Where did you hook up your power to?

[WHITE AND RED 69]

I put mine under the washer bottle. ran the coil wires along the ac line, the distributer wires behind the alternator, and the power wires under the headlights. 

Where did you hook up your power to?

I ran them straight to the battery. I ran the headlight wires and the msd power wires in the same route so it looks like one set going under the headlights.

[tan top]

here for me 

[Musicman]

I'm preparing to finally deal with my ignition problems using an MSD distributor by installing an FBO Distributor and Box in my 68 Charger.

Good choice!

1. Any good wiring guides for swapping from the regular ignition to the electronic box?

Everything you need to know can be found here: http://www.mymopar.com/index.php?pid=18

[440]

I like Just 6T9 CHGR's method    you can't see it without searching for it. I wonder if he'd miss that A688 box  

I'm waiting on the mail man to bring me one of those brackets from RocketResto  

[gtx6970]

out of site= out of mind

[gtx6970]

out of site= out of mind

[ODZKing]

Here's mine.  Not easy to spot unless you're looking for it.

[Just 6T9 CHGR]

Here's mine.  Not easy to spot unless you're looking for it.

Would have been better if you painted it red to match! 

[Musicman]

Here's mine.  Not easy to spot unless you're looking for it.

Would have been better if you painted it red to match! 

Red... Topher would like that

[bill440rt]

The orange box WILL fit under the battery tray, you just have to move it to one side so the plug clears the vacuum canister.

I hid my MSD box under the driver's seat, ran the wires thru the unused 4-spd grommet in the firewall.