News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Modified wiring harness

Started by journeycharger69, June 02, 2011, 11:00:51 PM

Previous topic - Next topic

journeycharger69

This is a modified wiring harness from Year One for engine compartment.

It has the updated alternator, and electronic ignition....

I do not know where these wires go,

Also how do u wire the coil... I figure one of the wires go to the coil, but do not know about the other side
of the coil... the electronic ignition is messing me up.

nascarxx29

black w yellow wire ring terminal - on coil for electronic ignition
gray ring terminal tach - coil
blue ring terminal + coil for key on ignition power
blue push on terminal alt field
green push on terminal alt field
Male female plug electronic distributor plug
And you should have a black large diameter wire for alternator power
And a push on brown wire for windshield washer pump

http://www.mymopar.com/downloads/elecignconv.pdf
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

journeycharger69

Thanks, on the alternator there is a ground connection.  Does anything need to go there?

nascarxx29

No the alternator will ground when mounted to the block
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

journeycharger69