need some valve spring help

[68chargerboy]

im going to buy a set of eddy rpm heads.  i am going to use 1.6 ratio rockers and that will put my turbo cam at 593 intake lift and 613 exhaust lift.  what springs should i use for this set up? will the stock retainers and keepers that come on the eddys be ok to use too? thanks in advance!!

Zach

[oldkimmer]

.........I would upgrade them also................kim........

[firefighter3931]

im going to buy a set of eddy rpm heads.  i am going to use 1.6 ratio rockers and that will put my turbo cam at 593 intake lift and 613 exhaust lift.  what springs should i use for this set up? will the stock retainers and keepers that come on the eddys be ok to use too? thanks in advance!!

Zach

Zach, the Isky 8005 valvesprings work fine with most solid cams and 1.6 rocker arms as long as the lobe profile isn't overly agressive. These will work with the stock E-head retainers/locks as well.  

Do you have a cam card for this bumpstick or perhaps some specs ?


Ron

[68chargerboy]

thanks for the spring help Ron, here the other cam info i have, just going off what is on the box dont have a cam card

adv dur:280 int 262 exh
dur @ .050: 251 int 262 exh
114 LSA

and you already know the lift

[68chargerboy]

im assuming ur talkin about the isky 8005-A.  correct?

[firefighter3931]

im assuming ur talkin about the isky 8005-A.  correct?

Yep,the 8005A is what you want....will work fine with that cam 


Ron

[68chargerboy]

thanks a lot Ron!