Headlight door installation

[Purple68]

I'm replacing my old doors with a nice used set I found this winter. The outside stop tabs on the old ones were both broken when I removed them in the fall. The replacements both have the tabs and I'm remembering it was a little tight getting my old doors out. Will I be able to get the new doors in with the grille in place? I can't check for myself as the car is stored for the winter.

[Purple68]

Ok this fell off the first page without a reply. Anyone know?

[WHITE AND RED 69]

The problem is the screws closest to the fender that hold the actuator bar on. If you can get to those it can be done but the clearance to get a wrench in there is so tight that I dont think its possible. Someone might know a trick that might help but for mine it was easier to take out the entire support.

[Purple68]

Thanks, now hopefully someone will chime in with their trick to install the outside screws.