News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Edelbrock quadrajet carbs

Started by Rayzor, February 07, 2011, 08:09:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Rayzor

February 07, 2011, 08:09:11 PM
I have a new in box Edekbrock quadrajet. I am wanting to run it on a stock spread bore 440 manifold. Anybody gone down this road yet? Also, I cant seem to find kick down linkage for this carb to work on mopar. Didnt they use these carbs in the 70,s at some point?

Rolling_Thunder

#1
February 09, 2011, 02:58:32 AM
not sure on the quardajet- I know they used thermoquads in the 70s...        Just get a lokar kickdown or something   haha   
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

chargerbr549

#2
February 09, 2011, 08:38:54 AM
I don't think they started using Quadrajets until the mid 80,s on the small blocks. I ran a 1975 454 Qjet carb on my 74 440 engine and I ended up copying the bracket they used to make it work for mopars, I don't remember if  the bracket was off a factory QJet from the 80's or an aftermarket adapter that was possibly used. It sucks getting old.

Kevin
Print
Go Up Pages1
User actions