Are these the correct chrome lug nuts for magnum wheels?

[1969chargerrtse]

http://cgi.ebay.com/ebaymotors/Dodge-Rallye-Wheel-1-2-RH-LH-Chrome-LUG-NUTS-Mopar-_W0QQcmdZViewItemQQfitsZYearQ3a1969Q7cMakeQ3aDodgeQ7cModelQ3aChargerQQhashZitem483db3efddQQitemZ310272847837QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

My lug nuts are mismatched and some of the chrome is peeling.  I never knew there was left and right.  Would these be correct and nice for my car?
Thanks. 

[Just 6T9 CHGR]

Nope....nice but not correct....supposedly the "pimple" style nut is the "correct" one.

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=5243307&page=0&fpart=1&vc=1



You never took the wheels off your car yet to realize there was left & right hand threads?  



Mike over @ BE/A sells these with the correct "L" stamping to denote the LH thread nut....10 of each (L&R) for $95....also sells 20 RH ones for $70
http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=18

[1969chargerrtse]

I knew you would ask that. Yeah I've removed my tires. Just never noticed. So wait. They tighten cw on one side and ccw on the other?
I don't  remember R&L. Is it possible mine were changed over to R on both sides?

[Highbanked Hauler]

I knew you would ask that. Yeah I've removed my tires. Just never noticed. So wait. They tighten cw on one side and ccw on the other?
I don't  remember R&L. Is it possible mine were changed over to R on both sides?

You'd know if you had left hand threads on the left side as turning to the left they would tighten.

[Just 6T9 CHGR]

I knew you would ask that. Yeah I've removed my tires. Just never noticed. So wait. They tighten cw on one side and ccw on the other?
I don't  remember R&L. Is it possible mine were changed over to R on both sides?

Its possible because I changed mine....

[Back N Black]

Most people change to right hand thread, less confusion. If you ever take it to a garage i bet they will Fu#k it up.

[1969chargerrtse]

I knew you would ask that. Yeah I've removed my tires. Just never noticed. So wait. They tighten cw on one side and ccw on the other?
I don't remember R&L. Is it possible mine were changed over to R on both sides?

Its possible because I changed mine....

Yeah, if I had left threads I'd remember.  I removed all 4 wheels with my electric gun and I don't remember having to use reverse to remove one side?
That's why I wasn't aware about the R and L.  Problem now is when I replace them I need all Right thread.

[Just 6T9 CHGR]

Thats not a problem at all since RH thread nuts are readily available.....the LH thread ones were unavailable till recently...

[1969chargerrtse]

Thats not a problem at all since RH thread nuts are readily available.....the LH thread ones were unavailable till recently...

  Thanks and