Origional inner 4-speed boot???

[troy.70R/T]

I just recently purchased an inner 4-speed boot for my 70 Charger 4-speed car. I am not sure if they make reproductions of this yet but there is a part number on it. The number is 2950074-53495. Can anyone tell me if this was the correct part number for this part. Aslo was this same boot also used on the 68 and 69 4-speed console cars?? thanks     

[UFO]

That number is in the parts as - '70 B body w/o console oblong shape-.
Wouldn't the '68-'69 boots have a round hole for the shifter.

[472 R/T SE]

Bill Allphin was gonna try to reproduce them but there wasn't enough interest IIRC.

[elacruze]

Bill Allphin was gonna try to reproduce them but there wasn't enough interest IIRC.

He did find a number of NOS boots, and should have some left. I'm sure he'll chime in. I'm tracking one for my car from him but haven't pulled the trigger yet.

[troy.70R/T]

I tried to take a picture of the part number but my camera will not focus on it. there is only the number and not pentastar stamped on it. Would this be a part that hurst would have produced for dodge? I see in my 70 dodge manual it show this boot going under the console, but no part number for it. Also mine does not have a hole cut in it yet that is why I was wondering if 68, 69 and 70 were all the same and if you had to cut the hole in them when they were installed?

[elacruze]

Check this thread-
http://www.dodgecharger.com/forum/index.php/topic,59307.0.html

[gtx6970]

the pt number on the steel ring is the same between the 2 boots.

I know for a fact  it's a on 1970 , just not 100% positive if it is or isn't used on 68-69's

[troy.70R/T]

Thanks for the help guys.

[AKcharger]

I need one for my conversion. I'd love to get an original but otherwise I was just going to use a '69 one...it really doesn't matter, no one will ever see it with the console