Swaybars needed!

[SHARP68]

Where is the best deal for a front & rear swaybar kit for a 68' charger?  Not hotchkis I am not that rich so be easy on me!

[ChargerST]

Try Race-Mart - they had the cheapest prices on Hellwig bars the last time I looked (google -> shopping).

[SHARP68]

Thanks for the info!  Are the addco bars any good? 

[HPP]

Hotchkis bars are the ultimate street set up right now. Behind that I'd put Firm Feel for its closeness to OEM style and mounting. That isn't to say Helwig, Addco or any generic bar is bad, just those two tend to be better.

Summit, Jegs, PST, Just Suspension, any of them can provide bars at reasonable prices.

[ACUDANUT]

Summit, Jegs, PST, Just Suspension. !!

[tan top]

Thanks for the info!  Are the addco bars any good?  

have  addco bars Front & Rear on mine !!  

[SHARP68]

Yeah i would love a hotchkis setup!  Need a little more money in the bank though.  Thank you for the suggestions what would i do without this site

[BigBlockSam]

do they make a rear sway bar that you don;t have to drill into the frame rails ?

[SHARP68]

As far as I know all I have seen you have to drill the rails.  Don't bother me for a tighter car though

[ACUDANUT]

Lets try English 101. As far as I know, all I have ever seen,  is you have to drill the rails.  Don't bother me for a tighter car though --??

[BigBlockSam]

Lets try English 101. As far as I know, all I have ever seen,  is you have to drill the rails.  Don't bother me for a tighter car though  --??

yea , i'm not drilling through my rear frame rails . they made it this long . i'm not gonna be the guy to drill into them .

[Mike DC]

Did Hotchkiss ever start making the '69-earlier front swaybar setup again? 

They started out making it, then they converted to '70-up (thru the K-member rather than on the lower front of it) because it fits the E-bodies.  I thought I heard they were gonna make some more of the '69-down ones again. 

[SHARP68]

Thanks for the english lesson!  Good to know someone will always be there for the real problem at hand.  Can't get advice anymore without someone having to point out everything you do wrong.  If I make anymore make sure to let me know buddy!  It does not bother me to drill the frame rails!  I don't see the big deal in doing it.

[BigBlockSam]

Thanks for the english lesson!  Good to know someone will always be there for the real problem at hand.  Can't get advice anymore without someone having to point out everything you do wrong.  If I make anymore make sure to let me know buddy!  It does not bother me to drill the frame rails!  I don't see the big deal in doing it.

then i may have a sway bar for sale . cause i'm not using the one i got.

[SHARP68]

What do you have?