News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Back firing problems

Started by 66chargertoy, July 08, 2010, 12:16:31 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

66chargertoy

July 08, 2010, 12:16:31 PM
Ok, need some help  :scratchchin:. Engine is backfiring while under load, while getting her up to speed.  Running a 750 Holley vacuum secondary. Float levels and idle screws checked and adjusted. NGK plugs and  Firecore wires. Pulled #1 and #2 plugs and they were a nice tan color. Will get to the other plugs when engine cools down a bit. It just started doing this the other day for no reason at all. The distributor is a full  built in unit with the brains inside. Should the coil, Promaster #29440 from Mallory have a direct 12volts to it, or should it run through a ballast resistor first like I have it now.
1966 440 Charger

66chargertoy

#1
July 08, 2010, 01:06:47 PM
Here is the other pic.
1966 440 Charger
Print
Go Up Pages1
User actions