News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

318 water pump snout length-Options?

Started by elacruze, July 04, 2010, 08:57:26 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

elacruze

July 04, 2010, 08:57:26 AM
I'd like to put a fan clutch in my 318 pickup, but I only have 2" between the water pump flange and the radiator. Is there a short snout water pump for LA engines? I can't see in the pulley far enough to get an idea of the shaft length, but the housing sticks out pretty far. It's in a '68 D200.
1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.

RD

#1
July 04, 2010, 01:16:04 PM
part number 58-180 A1 Cardone.  Shows a cast iron water pump. $26 plus $4 core at O'Reilly's.

http://www.oreillyauto.com/site/c/detail/A1C0/58180.oap?year=1968&make=Dodge&model=D200%2BPickup&vi=1084924&pt=01398&ppt=C0331
67 Plymouth Barracuda, 69 Plymouth Barracuda, 73 Charger SE, 75 D100, 80 Sno-Commander

elacruze

#2
July 04, 2010, 02:17:03 PM
How can I tell if that's shorter than what I have?  :shruggy:
Mine is 5" from gasket to fan flange.
1968 505" EFI 4-speed
1968 D200 Camper Special, 318/2bbl/4spd/4.10
---
Torque converters are for construction equipment.
Print
Go Up Pages1
User actions