Front Sway bar size on Charger R/T?

[69chargerrt]

I'm trying to find a set of bushings for my front sway bars on my '69 Charger R/T - I measured the diameter of the bar (original, as far as I know/tell) and I'm getting (after several measurments) an average of .950". Energy Suspension has a 7/8" and a 15/16" set of bushings - which one is correct, since .950" is slightly wider than the 15/16"? Or should I be looking at 1" bushings?

I guess what I'm trying to ask is, what size were the factory size sway bars?

[bricklayer]

My 69 charger was 15/16  tom.

[tan top]

My 69 charger was 15/16  tom.

yep 15/16  for a factory R/T sway bar ! that was on my 69 ,  

[Just 6T9 CHGR]

From the 69 facts & features manual....

15/16" converts to 0.9375"  rounded up = 0.94"

lots of cool little tidbits on my site....  www.1969chargerregistry.com