What kind of nuts for the hinge?

[Belgium R/T -68]

My new door for the console glovebox needs some nuts for the hinge, some kind of speednuts?

Per

[C500]

My new door for the console glovebox needs some nuts for the hinge, some kind of speednuts?

Per

Yes, it is supposed to have some unique dome shaped speed nuts. They are kind of acorn shaped. Not sure if you can get them repro or not.

[Hemidog]

http://www.rtspecialties.net/proddetail.asp?prod=1000238

Be careful when you tighten them, they are easily rounded.
I switched them out with standard nuts, much better!

[Belgium R/T -68]

http://www.rtspecialties.net/proddetail.asp?prod=1000238

Be careful when you tighten them, they are easily rounded.
I switched them out with standard nuts, much better!

OK, so you made threads on there? I thought of that.

Per

[Hemidog]

Yep! 

[tan top]

yep done the same & put little black plastic domes on the nuts , similar to vacume plugs 

[Brock Lee]

I ended up using real nuts as well. I didn't even need to tap them. The potmetal is so soft that the steel nut threaded as it went on.