News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need a blower motor resistor

Started by pandamarie, February 09, 2010, 08:19:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

pandamarie

February 09, 2010, 08:19:14 PM
Anyone know where I can get a blower motor resistor? I tried year one, they dont have them, neither do any of the parts stores.
Anyone make thier own solid state one?

Nacho-RT74

#1
February 09, 2010, 11:07:21 PM
year?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

daves68

#2
February 13, 2010, 08:54:27 AM
Yeah- I need one too. '68 with AC. Found some in boneyards but the coils look different. Don't know if they will work or not.

twodko

#3
February 16, 2010, 06:14:26 PM
I don't see why they couldn't be fabricated. If you know of someone with a 68/69 Charger, go over and ohm it out. One end of that resistor is common, the other 3 have got to be different resistances. Pull the connector off it before ohming it with a VOM. Seems to me a new board can be made using some high power resistors, maybe 1 watt or better to handle the heat?
What does the forum think along these lines?

Tom
FLY NAVY/Marine Corps or take the bus!

A383Wing

#4
February 16, 2010, 11:37:46 PM
I have AC resistors here from 66 & 67's.....used but good. PM me if interested

Bryan
Print
Go Up Pages1
User actions