Which bushing goes where - booster linkage

[grdprx]

So, I did the typical thing.. Installed my power booster before I knew/realised that the linkage needs to be installed prior.

There are 2 of these metal bushings, one with an O ring and one without.  Which goes where?  I didn't take it apart, so I don't know...

Appreciate any input, thanks!   

[The70RT]

I just did mine a few months back but don't remember....but look inside close to where they go and you should see a center ring. It almost looks like I can see a partial mark in the lower part (round end) in the pic?

[John_Kunkel]

The bushing with the O ring groove goes in the center hole of the bar and the dogbone link attaches to it, the other bushing goes in the outer hole and attaches to the pushrod in the booster.

[grdprx]

Perfect, thank you gentlemen.

[y3chargerrt]

Heres an Ebay link with a good picture.

http://cgi.ebay.com/ebaymotors/68-69-70-CHARGER-440-MOPAR-BRAKE-PEDAL-BOOSTER-BRACKET_W0QQitemZ190350822203QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item2c51cb0b3b