73 Charger front sway bar links

[FLG]

Hey guys,

Who sells correct sway bar links for a 73? I have seen a few not sure who to go with?


Thanks,

Frank

[Nacho-RT74]

you mean these?



how many do you need ?

[FLG]

Your the man nacho!!!

Gonna PM ya!!

[bordin34]

if you need measurements, I have the upper half.

[Nacho-RT74]

needles to say these are NOS, just suface rust.

have to say too this PN doesn't meet with the one on my catalog BUT will check with the one on my car. Simply it can be a supersedes number. There are also two kinds of them at Mopar dealer here with one small differences, the holding ring to the insulator retainer located at diff height!

[FLG]

Trust me..better then the ones that are on here.

Do u need me to measure the distance from the ring nacho?

[Nacho-RT74]

that will be helpfull. I don't want to send wrong ones.

measure the total lenght and then the measurement from ring to top. I will compare with these.

[FLG]

Damn i measured but cant remember now...

Well if i remember correctly it was 6" from the busing ring and about 8 inches all together. Damn im gonna have to measure again LOL!!

[Nacho-RT74]

LOL, don't worry I'll measure the ones I have on my trunk and post pics. I took a pair of each one at dealer

[FLG]

Btw i measured from ring to bottom. Its easier because mine are still attached.

[Nacho-RT74]

Frank... here is what I got. both same lenght only diff is the ring height
one at 3", and the other one 3 1/4"

total lenght 5 1/4"

couple of millimeters more or less

[FLG]

OK i measured form the bottom of the bracket. No big deal, will measure tonight or tomorrow.

[bordin34]

Frank,I just measured mine that are off the car and mine are almost exactly 3".

[Nacho-RT74]

same lenght?

[bordin34]

Mine look to be the same as the top one in your picture.