2 part question FOR A 69 CHARGER

6d9 charger · August 22, 2009, 01:57:34 PM

I AM TRYING TO PUT THE TRUNK BUMPERS ( RUBBER ON EACH SIDE UNDER TRUNK LID ) THE KIT CAME WITH 2 SIZES , IM NOT SURE WHAT PAIR ARE FOR THE TRUNK. ANYONE HAVE A PHOTO ?

PART 2 UNDER THE HOOD I BOUGHT A HOOD TO RADIATOR KIT , IT IS 2" WIDE AND ABOUT 48" ACROSS BLACK RUBBER . THE HOLES DONT LINE UP WITH THE UNDERSIDE OF THE HOOD . ANY PICS OF IT INSTALLED WOULD HELP . THIS IS FOR A 69 CHARGER
THANKS
PETE

TylerCharger69 · August 22, 2009, 03:56:36 PM

Didn't the underhood rubber come with the clips that hold it in? And...I believe that since those clips are offset....it would appear that the holes don't line up....but they do.....Where did you purchase it from? I think that's what it is....but I'm not 100% sure....I'm sure someone can post a pic of it along with the clips.....The trunk bumpers?....I don't know without seeing a pic of what you have.

6d9 charger · August 22, 2009, 05:36:24 PM

I GOT THE RUBBER FROM YEAR ONE , THE REAR TRUNK BUMPERS ARE ABOUT 3/4 OF AN INCH ROUND AND THE LITTLE BIGGER ONES THAT AREA LITTLE MORE THAN AN INCH ROUND

Troy · August 22, 2009, 09:22:56 PM

Ok, I got you some pictures tonight. First, is your hood seal facing so the "flap" is towards the engine? I noticed on my hood that the holes are definitely not centered or evenly spaced so if it's backwards or flipped then the holes won't align. I believe the trunk bumpers are the smaller ones but I didn't measure them. I can't remember where the larger ones may go. I'll post the pics once I get them resized.

Troy

Just 6T9 CHGR · August 23, 2009, 08:58:26 PM

Hood seal.....

Just 6T9 CHGR · August 23, 2009, 09:04:46 PM

Trunk bumpers....hope they help!

6d9 charger · August 23, 2009, 09:53:58 PM

YES THEY DO HELP, THANKS FOR THE PHOTOS . TO ALL , I AM SURE I WILL HAVE MORE QUESTIONS

TylerCharger69 · August 23, 2009, 10:06:59 PM

That is a beautiful car by the way....

Just 6T9 CHGR · August 23, 2009, 11:10:58 PM

Quote from: TylerCharger69 on August 23, 2009, 10:06:59 PM
That is a beautiful car by the way....

Why thank you

Troy · August 24, 2009, 08:37:55 PM

Beat me to it...

the trunk bumpers are 7/8" on all my 68s. Here's a pic of a hood seal. You can almost see where the spacing is but notice that they are offset. That one that looks centered is slightly off to the left.

Troy

richRTSE · August 25, 2009, 05:46:53 PM

I have one of those reproduction hood seals, and I think I had to make several new holes because they were definately off by a few inches.

TylerCharger69 · August 25, 2009, 07:09:29 PM

Quote from: NOT Just 6T9 CHGR on August 23, 2009, 08:58:26 PM
Hood seal.....

Is there a reason why the fronts of the fender looked rounded against the front grille???

Just 6T9 CHGR · August 27, 2009, 05:48:47 PM

Piss poor body work.....when the car car gets repainted one day to its original R6 new fenders will be in order

DodgeCharger.com Forum

News: