update {gettin er dun}

[bigroge1]

been sanding down the body to get rid of surface rust and to get the body lines to appear like new, as i was sanding down there's a buttload of body filler showing up and major bondo on the front end of the hood. I'm still new at this been reading threads for at least two hours a day to help my progress.

Having trouble with removing the rear bumper from the bottom, seems the bolts are stuck to the rusted bottom trunk area and i dont know if i can use bondo on top of old sanded down bondo on the front end of the hood, the rear channels aren't that bad dont know if i can save that as well 

[bigroge1]

since its finally getting warm in Denver i been goin in the garage for quite some time now.  that 318 motor thats in my charger now i don't  want it i'm selling it for 40 bucks and that comes wit the tranny thats attached to it as well 

[Projekts]

My front bumper was rusted in just like your rear bumper. I used a die grinder and shaved the head, when it got down to about the thickness of a potato chip I cold chiseled it. It was a slow process, especially while laying on my back, but it did not damage the bumper. I don't know how savable your window channels are, it looks like your deck fill pan was patched already?

[bigroge1]

sort of, it was a hacked job cause the deck lid had sunken in when it was done so i gotta fixed that as well.got the bumper off with a breaker bar. took alot of muscle and scraped knuckles to get the bumper off . the 318 is finally gone

[bigroge1]

was sanding down the hood and wow i think the hood was painted  WALMART orange. i found some surface rust inside of the underhood and so the question is does the hood come apart in two pieces cause from what i can tell i can kinda separate them both apart with a screw driver. or should i just power wash it and kill the surface rust a different way

[bigroge1]

since its been rainin everyday for the past three weeks i decided to just work on the grill, thanks to "GeneralLeeTESH" i decided to try his way. heres some pics 

[bigroge1]

day three workin on this grill my finger prints are gone but it's all worth it, eye piece is almost done just gotta sand it down to a correct shape

[bigroge1]

Alright finally got some time to work on the grill, just sanded down, prepped and painted the grill shell , along with the R/T badge. the other driver side grill is pretty much broken, but im determined to get it done before july ends

[TylerCharger69]

Is that a bowl of Dinty Moore Stew I see there next to the sink?...lol

[bigroge1]

LMAO naw it's my mums home made chili soup it only burns coming out the other end. the eye piece is done and the R/t badge took awhile with the masking part but it's done

[Silver R/T]

looks like you're not going to put silver on grille? What I did is I sprayed silver first, then taped it off and sprayed black. Turned out quite good.

[bigroge1]

im still debating on the color right now. i've seen grills that are the same color as the car like orange or green and it looks good but i've never seen anyone doin an all black front grill on a black 69 charger.  then again seeing the old school colors on a grill still looks great. does anyone on here can make a rough sketch of an all black 69 charger including the trim being black as well

[Brock Samson]

 mine pre '99... grill was all semi gloss and the rear facia too..

[PocketThunder]

Your wifes gonna be mad that you painted her patio chairs.. 

[bigroge1]

mine pre '99... grill was all semi gloss and the rear facia too..

that's what i'm aiming at thanks Brock, im going for flat black since some new challengers has been sporting it around here, those lawn chairs have been a resort for wasp for some odd reason for every summer so she don't mind lol