weiand stealth rb intake

[greenrt_se]

How much lower the stealt intake is than Edelbrock Rpm intake??

[y3chargerrt]

Not sure about the answer to your question but i have the 8009 intake on my 69 440. The air cleaner clears the hood fine. A plus also to me is once I ground off the weiand name and number it looks stock.

[Fore40]

I also have a 8009 on my 68 440 looks stock plenty of clearance with a stock air cleaner.

[firefighter3931]

A Street Dominator will clear, no problem. If you're looking for a really descent dual plane the old edelbrock CH4B is slightly taller than stock and works fabulously. These are no longer being made but come up for sale cheap on e-bay every now and then.

fwiw....the performer rpm will clear a stock hood with the right air cleaner assembly. A 14x3 with a 1.25 drop base is what you want. I recommended that to another member here and it worked fine for him with the performer rpm intake and holley carb he was running on his 69 charger.  

Ron

[Ghoste]

Providing you aren't running a spacer. 

[greenrt_se]

yeah I use the spacer,and thats the problem,even whit drop base claener

[Ghoste]

Is it a Carter or Eddy Performer carb?

[firefighter3931]

yeah I use the spacer,and thats the problem,even whit drop base claener

Get rid of the spacer....all you need is a carb insulating gasket. Something that's 1/4in thick will suffice.  

Ron

[Ghoste]

Oh yeah, I was even thinking about that part.  The Performer RPM kind of provides it's own spacer with the raised plenum there doesn't it?  I was thinking of the Carter fuel inlet and how it interferes even with most drop down air cleaners unless you use the restrictive 90* fitting.

[greenrt_se]

the carb is Demon 750 cfm

[Ghoste]

Yeah, you're good to go with that as far as air cleaners.