epoxy primer

[MTPOCKET]

Going to spray some PPG MP170 epoxy primer does anyone have any advice or tips in using this product? This is the first time I have used this product and any input would be greatly appreciated. Thank You.

[Troy]

Use complete sentences?

Some info:
http://www.dodgecharger.com/forum/index.php/topic,663.0.html
http://www.dodgecharger.com/forum/index.php/topic,1202.0.html
http://www.dodgecharger.com/forum/index.php/topic,3398.0.html
http://www.dodgecharger.com/forum/index.php/topic,4960.0.html

Troy

[cudaken]

 I have never shoot that brand, I think Drop does. Only thing I can tell you is make sure you have a 50% over lap with the paint pattern, use a 1.8 head if not a little bigger and if you can reduce I would about 10%. Will help it flow out a little better and less peel you have less sanding later.

I used Americn Finsheis AP 440 and it flowed out great.

                                         Cuda Ken

[AdamMopar]

I use it all the time.  Just follow the p-sheet and you won't have any problems.  I've nver had an inssue with it. Adam

[4402tuff4u]

I know from first experience not to touch the bare metal once you prep it and wipe it with the metal prep solution. I was yelled at by my body guy who had the hood ready for primer in the booth and I went inside and not knowing and just touch it with my finger and the painter said that he had to now re-wipe the area that I touched. Who knew?? :shruggy:l