little white bushings for headlights

[FJ5WING]

HELP!

I cant seem to find anyone who sells these. Can anyone help me out?


Dave

[nascarxx29]

I remember those split white bushings used on Chrysler products.And known as the ones for headlight pivot shaft remember seeing them used on other universal applications..Did you try Dave Patik. No matter what the make or application products the help rack or napa

[Aero426]

We have the bushings available.  $20 set of 4 including the shipping.   Just PM me.



If you need the bolts, we have them too.   $25 including shipping (set of 10)

[nascarxx29]

 :2thumbs:Thats good there still available .Ive even seen a part on a lawnmower that reminde me of those things.They refer to them as a split bushing
http://www.jackssmallengines.com/ayp_bearings.cfm

[Aero426]

:2thumbs:Thats good there still available .Ive even seen a part on a lawnmower that reminde me of those things.They refer to them as a split bushing
http://www.jackssmallengines.com/ayp_bearings.cfm

The one on that small engine listing is the wrong size.  It won't work.

[nascarxx29]

Ok thanks .If you ever run out .Im certain if you have a sample.
http://www.thomasnet.com/products/split-bushings-9290909-1.html

[FJ5WING]

Thanks Doug!!

PM coming soon.

[nascarxx29]

Those C Clips are a common hardware store item

[CornDogsCharger]

Just out of curiosity.... I was restoring the clutch/brake petal assembly on the 'Bird today.  Would these white clips also be the same ones that were used on the brake/booster pivot?  They look the same.

Justin
"CornDog"

[Hemi_tyme]

not the same part. The headlight pivots bushings will not work.I think you can get the brake pivot bushing from Bill Allphin http://www.amhightechauto.com/ Ken

[CornDogsCharger]

Thanks for the link.  These were in nice shape.  I was just wondering if they might be the same.  If so that would have helped tremendously for a lot of people.  I did need to replace the needle bearings (2) in the clutch pedal though.  Thanks again

Justin
"CornDog"

[62 Max]

:2thumbs:Thats good there still available .Ive even seen a part on a lawnmower that reminde me of those things.They refer to them as a split bushing
http://www.jackssmallengines.com/ayp_bearings.cfm

The one on that small engine listing is the wrong size.  It won't work.

Doug,I hate to mention this, but cut to fit they will.

[Aero426]

:2thumbs:Thats good there still available .Ive even seen a part on a lawnmower that reminde me of those things.They refer to them as a split bushing
http://www.jackssmallengines.com/ayp_bearings.cfm

The one on that small engine listing is the wrong size.  It won't work.

Doug,I hate to mention this, but cut to fit they will.

Why would you want to mess with that when you can get the exact original part and just snap it in?   

[nascarxx29]

Thanks Bill 62 Max .Knowing that unusual wingcar parts are limited like the bushings etc are limited .I had to retro fit AKa modify or find a substitute before purchasing club parts.Or knowing that they stocked this stuff,My old school techniques or being resourceful


A hardware store storm cylinder found bracket hollow up the center and alum to cut to length and drill a hole.For a fiberglass headlight pivot bracket to actuator.Was just better then waiting for the fiberglass tab to fail.And if you couldnt get or find headlight bucket bolts tiolet seat bolts work just file the hex shape.And Larry went with GTO vac pods because these you sometimes cant get these #961