318 heads

[ChargerRT440]

Ok I've got my heads for my motor all cleaned up what i'd like to know is if anyone knows what the best degree I can put on the valves is to improve the flow?

Currently the block is out getting cleaned and the crank is getting a -.010 cut on it.

[chrisII]

the best thing to do is dump the 318 heads and bolt on some 360 heads if you want to flow. but if you are keeping it stock take it to a good engine shop and let them figure out the final specs

[Chryco Psycho]

back cut the vales to remove the lip on them & use a 3 or 5 angle valve job