Looking for suggestions on roller rocker set.....

[Back N Black]

I have the Edelbrock RPM heads and I'm looking for a set roller rockers that won't break the bank. Also, can i use the original manifolds with the RPM heads?  

[firefighter3931]

I have the Edelbrock RPM heads and I'm looking for a set roller rockers that won't break the bank. Also, can i use the original manifolds with the RPM heads?  

The Crane Gold are a descent "entry level" roller rocker and work fine with flat tappet spring pressures. Further up the food chain is Harland Sharp, T&D and Jesel. It really depends on the application as to what is the "best" choice for your build.

The HP manifolds work fine with Eddy RPM heads but you will want to use a wireset with a compact plug boot because the angled plug head places the wires close in a few spots.


Ron

[bigbluedodge]

I personally have had good luck with Crane Golds with a pretty big solid cam (.640 or so) and springs. They are currently on backorder at Summit and Jegs, though.

[Beer]

Only got dynotime on the motor so far, part numbers for the smallblock are in my Stroker thread. Comp Cams I believe.