News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

rear differential brake line configuration

Started by hemi68charger, January 19, 2009, 01:44:55 PM

Previous topic - Next topic

hemi68charger

Hey gang..
Anyone have a closer of their brake line "t" on their 8.75 housing? I'm trying to see if there's a washer between the "t" and housing or bolt head and "t"....

Thanks..
Troy
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

John_Kunkel


Every one I've taken apart has an external tooth lock washer.
Pardon me but my karma just ran over your dogma.

hemi68charger

Quote from: John_Kunkel on January 19, 2009, 07:19:07 PM

Every one I've taken apart has an external tooth lock washer.

Got that one John.. I was wondering about between the "t" and the housing.. But, I investigated the one on my '70 and it didn't... Life's good now..  ;D

Now, I just need to find the original one to my '68....  :brickwall:   Hate having vehicles tore apart so long...

Troy
Troy
'69 Charger Daytona 440 auto 4.10 Dana ( now 426 HEMI )
'70 Superbird 426 Hemi auto: Lindsley Bonneville Salt Flat world record holder (220.2mph)
Houston Mopar Club Connection

terrible one

Quote from: hemi68charger on January 19, 2009, 08:07:18 PM
Quote from: John_Kunkel on January 19, 2009, 07:19:07 PM

Every one I've taken apart has an external tooth lock washer.

Got that one John.. I was wondering about between the "t" and the housing.. But, I investigated the one on my '70 and it didn't... Life's good now..  ;D

Now, I just need to find the original one to my '68....  :brickwall:   Hate having vehicles tore apart so long...

Troy

Just to add to that, my '68 didn't have anything between the T and the housing either. If I remember correctly, the T actually has a little recess in the bottom of it to help it conform to the shape of the housing.